Go-Video DVR 4550 - Manual (Page 29)

23 5 - VCR Recording
RECORD SETTINGS
1 O P E N “ S E T U P M E N U ”
Press SETUP/ENTER.
2 S E L E C T “ V C R & C H A N N E L S E T U P ”
Use the UP/DOWN arrow keys to move the
pointer to “VCR & Channel Setup,” then
press the RIGHT arrow key to select.
3 A D J U S T R E C O R D S E T T I N G S
Use the UP/DOWN/RIGHT arrow keys to
select and set the following:
D a t e / T i m e S t a m p
Timer – The date, time, and record
source will be “stamped” (superimposed)
briefly at the start of all timer recordings.
All – The date, time, and record source
will be stamped briefly at the start of all
recordings.
None – The date, time, and record
source will not be stamped.
R e c o r d S o u r c e
Set your VCR’s default record source to
one of the following:
Auto – The VCR will record whatever is
currently visible on screen (default set-
ting).
Tuner – The VCR will record from the
DVD+VCR’s built-in television tuner.
Line 1 – The VCR will record from an
external source, such as a camcorder,
connected to the front line inputs.
Line 2 – The VCR will record from an
external source, such as a satellite re-
ceiver, connected to the rear line inputs.
DVD – The VCR will record from a DVD or
CD playing in the DVD deck.
Follow these steps to set the default VCR
record settings for your DVD+VCR.
press
SETUP MENU
Set Timer Recording
Child Lock
Off
Set Clock
DVD Setup
VCR & Channel Setup
Language/Langue/Idioma
/ To Move To Select
RETURN to Quit
VCR & CHANNEL SETUP
VCR Plus Setup
Channel Setup
Date/Time Stamp
Timer
Auto Play/Rewind Both
Record Source Auto
Panel Display Auto
To Move / To Select
RETURN To Go Back
Select “VCR & Channel Setup”
Select “Date/Time Stamp” &
“Record Source”
SETUP
/ENTER