H e l p, Troubleshooting – Go-Video DVR 4550 User Manual

Page 64

Advertising
background image

58

DVD+VCR User’s Guide

TROUBLESHOOTING

H E L P

This Chapter provides customer support information, as well as a list of FAQs,

technical specifications, the product warranty and a special feature summary.

The chart below will help you solve common challenges with your DVD+VCR. If
you don’t find the answers you need here, you can contact our Customer Service
Department as follows:

SYMPTOM

SOLUTION(S)

Cannot access Setup menu.

• Stop the DVD player. You cannot access the

Setup menu while a disc is playing.

No sound from speakers.

• Connect the DVD+VCR to a Dolby Digital-ready

amplifier. You cannot connect speakers directly
to the analog audio outputs because the unit
does not have a built-in amplifier.

• Dolby Digital and/or DTS not enabled in the

menu system; see page 39.

TV only shows Go-Video screen.

• Connect the Composite and S-Video outputs to

separate inputs on your television. If your
television has one set of inputs for both S-Video
and Composite, then the S-Video will most
likely override the Composite input.

Cannot play other regional DVDs.

• The DVD-VCR will play Region 1 encoded discs

only.

Cannot record on DVD deck.

• The DVD deck does not allow recording.

Can I connect to surround sound system? • Yes, you can connect the DVD+VCR to an

audio/video receiver or amplifier using the
coaxial or optical digital outputs or analog
outputs.

What types of discs can I play?

• DVD Video, CD Digital Audio, CD Video, SVCD

and CD-ROM with MP3 tracks.

Picture has black bars.

• Make sure your TV Aspect Ratio is set properly

to 4:3 or 16:9; see page 51.

• Aspect ratios vary from disc to disc. The specific

DVD may not offer a 4:3 full-screen version.

Auto Setup did not find all channels.

• If a cable box/satellite receiver is connected,

the DVD+VCR will only find the cable box
output channel. Use the alternative cable box
hookup on page 42.

No picture.

• Press TV/VCR until the VCR indicator lights on

the front panel display.

• Set Channel Switch to channel 4.

D

A P P E N D I X

Phone:

(480) 922-0896

E-Mail:

[email protected]

Web:

“www.govideo.com” or
“www.sonicblue.com”

Advertising