Go-Video DVR 4550 - Manual (Page 42)

36 DVD+VCR User’s Guide
A
A D V A N C E D C O N N E C T I O N S
This Chapter will show you how to use the S-Video and Component Video outputs,
as well as how to connect additional audio/video devices to your DVD+VCR.
S-VIDEO/COMPONENT HOOKUP
A P P E N D I X
Follow these steps to connect the DVD+VCR to your TV
using the S-Video or Component Video outputs.
N O T E S
• You must set the “Alt Video Out Setting” on page 37 to activate S-Video or Component Video.
• You can ONLY watch the DVD player with the S-Video or Component Video connection method. The
tuner and VCR will still be viewed through the RF or line outputs.
To S-Video Input
on your TV
1 C O N N E C T S - V I D E O O U T T O T V
Connect an S-Video cable from the S-Video
Output on the back panel of the DVD+VCR
to the S-Video Input on your television.
OR
C O N N E C T C O M P O N E N T V I D E O
O U T T O T V
Connect a component video cable from the
Component Video Output on the back
panel of the DVD+VCR to the Component
Video Input on your television.
2 C O N N E C T A U D I O O U T
Connect RCA audio cables from the Right/
Left Line Out jacks on the back panel of the
DVD+VCR to the Left/Right Audio Line In
jacks on your television.
• You must use these Line Out audio jacks
when connecting the DVD+VCR to your
TV with the S-Video or Component
Video Out.
3 S E L E C T “ A L T V I D E O O U T ”
Please continue on the next page with “Alt
Video Out Setting” to activate your connec-
tion in the DVD+VCR menu system.
To Component
Video Inputs
on your TV
To Left/Right
Audio Inputs
on your TV