Basic connections – Go-Video DVR 4550 User Manual

Page 8

Advertising
background image

2

DVD+VCR User’s Guide

1

C O N N E C T A N T E N N A / C A B L E T V

Connect the RF coaxial cable from your
indoor/outdoor antenna or cable wall
outlet to the IN (FROM ANT.) jack on
the back panel of the DVD+VCR.

2

C O N N E C T D V D + V C R T O T V

R F C o n n e c t i o n

Connect the supplied RF coaxial cable
from the “OUT (TO TV)” jack on the
DVD+VCR back panel to your television’s
antenna in jack. Use this connection if
your television is equipped with a basic
antenna input.

OR

L i n e C o n n e c t i o n

Connect the supplied stereo A/V cable
from the “Line Out” jacks on the
DVD+VCR back panel to your
television’s Line In jacks. Be sure to
match yellow to video, red to right
audio and white to left audio on your
television and DVD+VCR. Use this
connection for better sound and picture
quality if your television is equipped
with line inputs.

BASIC CONNECTIONS

3

S E T D V D + V C R O U T P U T C H A N N E L

If you used the RF connection in Step 2,
set the CH (Channel) switch on the back
panel of the DVD+VCR to 3 or 4,
whichever is not an active channel in
your area. If you used the Line Connec-
tion, skip to Step 4.

4

P L U G I N D V D + V C R

Connect the DVD+VCR power cord to a
standard 120V/60Hz wall outlet.

5

T U R N O N T V A N D D V D + V C R

Turn on your television, and press
POWER on your DVD+VCR.

6

S E T T V T O C H A N N E L 3 , 4 ,
O R L I N E

Set your TV to the same channel you
selected in Step 3. If you used the Line
Connection, set your TV to its Line
input.

• The “Language/Langue/Idioma”

menu should appear on the screen.

• Please proceed with Auto Setup on

the following page.

N O T E S

• For Advanced Connections, please refer to Appendix A.
• Even if you plan to use the S-Video or Component Video Outputs you MUST connect the DVD+VCR to

your television with either the RF or Line Connection. This will enable you to operate the DVD+VCR setup
menus.

Follow these steps to connect the DVD+VCR to
your television and antenna/cable TV.

To Line Inputs on

your Television

(Optional)

From Antenna

or Cable TV

To Television

Advertising