Gateway Computer Drive - Manual (Page 30)

26
Chapter 3: Installing a New Drive
www.gateway.com
6
Connect the flash memory drive’s round data cable to the Front Panel USB
connector on the system board. Be careful not to force the cable connector
or bend any of the pins.
7
Check all cables in your computer. Make sure that all are connected
securely and that the cables are routed so that they will not bind or crimp
when you replace the computer case cover.
8
Replace the computer case cover. See the documentation that came with
your computer for instructions on replacing the cover.
9
Reconnect the external cables, then plug in the power cord.