Diskette drive – Gateway Computer Drive User Manual
Page 41
![background image](/manuals/111507/41/background.png)
37
Diskette drive
www.gateway.com
Diskette drive
Some of the steps in this document may require you to remove the computer
case cover. Follow “Preventing static electricity discharge” on page 3 when
working inside your computer.
Your computer cannot access the diskette drive.
You may not be able to copy information to or from the diskette drive if:
■
The diskette is write-protected.
■
The diskette drive or diskette is damaged.
■
The settings in the BIOS are incorrect.
■
The cable that goes from the back of the diskette drive to the system board
or controller card is defective or not connected securely.
■
There is a conflict within the computer with some newly added hardware
or software.
■
The drive is damaged or a password has been enabled.
Your computer cannot access the diskette.
The diskette may be damaged. Reformat the diskette, or try another diskette.
To format a diskette:
1
Insert a diskette into the diskette drive.
2
In Windows XP, click
Start
, then click
My Computer
. The My Computer
window opens.
- OR -
In Windows Me, Windows 2000, Windows 98, or Windows NT 4.0
double-click the
My Computer
icon. The My Computer window opens.