GE 25450 - Manual (Page 108)

Settings and Adjustment
Reset System (Base Unit)
The system can be reset to factory defaults using a pointed object to press the reset
button inside the Reset hole on the back of the Base Unit.
The following settings/parameters will be changed after a reset:
• System Security ID—a new one will be randomly selected.
• Cordless Handset registration table—no Cordless Handset is registered
• Base unit Call Log
• Base unit CID records
• Base unit Directory
• Call forwarding numbers for all extensions
• All mailbox contents
• All extension mailbox passwords—reset to 0000.
• Admin password—reset back to 1 (RCA1).
• All custom outgoing messages will be reset to default
• Main OGM AA and VM—turned on for all lines
• Custom recorded hold message reset to default
• Time and date will be reset to 01/01 1:00 AM
• Mailbox greeting messages, voice volume, ring tone, ring volume, button tone,
button volume, dialing prefix, area codes, display contrast, dial mode, and flash
time will all be reset to default.
After a reset, all Cordless Handsets must be re-registered to obtain a new system
security code.
10