GE 25450 - Manual (Page 89)

5. Press the soft button.
6. Enter the old four-digit password when prompted. To return to the system set-
ting menu, press the soft button.
NOTE: The default password is “7221” . Use this password when resetting the voice mail
passwords or erasing all voice mail. If the administrator password has been changed, there is
no way to recover it without resetting the system. The administrator password will default to
“7221” after a reset.
7. If the password is incorrect, the display will show “Invalid password” and return
to the system setting menu.
8. If the password is correct, enter the new four-digit password when prompted. To
return to the system setting menu, press the soft button.
9. Re-enter the new password when prompted.
10. If the new password is retyped incorrectly, the system will to return to the “Enter
new password” display. Enter the new password and re-enter the password to
verify.
11. If both passwords match, the new password will be saved and the system will
return to the system setting menu.
Line Dedicate (Base Unit)
The line dedicate function allows a phone line to be dedicated to a single extension.
Auto attendant must be turned off to change line dedication.
NOTE: The system will exit the line dedicate function if the Exit button is pressed or a 15
second timeout is exceeded.
1. On the Base Unit, press the soft button.
2. Press 5 or 6 on the Navigation button to scroll through the options until
“Line dedicate” appears on the display.
3. Press the soft button.
#### ####
#### ####
#### ####
Settings and Adjustment