Gaggenau CK 481-6 - Manual (Page 11)

Switching the cooktop on and off
Touch the main switch symbol. An audible signal is
sounded and a spot lights on the main switch
symbol. All the cooking zone display show 0. The
cooktop is now in operation.
If no further inputs are made within approx.
20 seconds the cooktop automatically switches off.
By touching the main switch symbol at any time the
cooktop can be quickly switched off.
Switching on a cooking zone
The cooktop must be switched on by the main
switch. The switching on and off for all cooking
zones is identical.
• Touch the required cooking zone in the control
panel. The zero on the display of the selected
cooking zone flashes.
• Select the required cooking level within
5 seconds using the UP/DOWN symbols.
(You can immediately select level 9, 8, etc. using
the DOWN symbol.) The display of the cooking
zone flashes the chosen level. Note: if no input is
given within 5 seconds the cooking zone must be
re-activated.
• The selected cooking level is confirmed after a
few seconds by an audible signal and the display
lights constantly. Alternatively you can confirm the
values by again touching the cooking zone in the
control panel.
• The cooking zones are elecronically controlled
and during use, in order to maintain a constant
heat, the cooking zone switches on and off
intermittently.
10
4. Operation
Switching the cooktop on and off
Switching on a cooking zone