Gaggenau CK 481-6 - Manual (Page 21)

Using the options menu, the automatic quick-boil
function, cooking zone extension and the child lock
can be programmed to suit your individual needs. Use the symbols UP and DOWN to access the
options menu and chose the required values.
Use the symbol timer to store the required value.
Use the symbol + to go through the options menu.
Use the main switch symbol to exit the options
menu at any time. Values which have not been
confirmed will not be stored.
Note: the options menu will automatically end
without storing any values, should you stop
operating it for more than 2 minutes.
Options menu, setting the automatic
quick-boil time
Proceed as follows:
• Switch on the appliance by touching the main
switch. (Note: the timer should not be activated
and all cooking zones should be on 0.)
• Touch symbols UP and DOWN when the cooktop
is switched on. You will hear a signal. Keep your
fingers pressed down until a second signal sounds
after a few seconds and P1 lights on the timer
display panel. Remove fingers immediately. A 04
appears on the cooking zone display panel, i.e. a
quick boil time of 4 minutes is stored.
• You can now touch symbols UP or DOWN and
select a quick boil time from 1 to 15 minutes. The
selected quick boil time applies to all cooking
zones. The selected time (A 01 to A15) is shown
on the cooking zone display panel and P1 flashes
(requesting to store values).
• Store the required option by touching the timer
symbol. You will hear a signal and P1 lights
constantly.
In order to exit the options menu touch the main
switch. Values which have not been confirmed will
not be stored.
Should you require to program further functions,
touch the symbol +.
20
6. Options menu
Options menu,
setting the automatic quick-boil time