Garland 7000 User Manual
Page 4
Part # 4526029 (02/22/11)
Page 4
SECTION 1 – REQUIREMENTS
Authorized Personnel
The operator has to insure that all installation, maintenance
and inspection work is carried out by authorized and
qualifi ed personnel who has done a training course at Inducs
Ltd.
“Operation Instructions“ Knowledge
In order to do service work on an induction generator,
the operator must have an extended knowledge of the
“Operating Instructions“.
Knowledge Of Electronic Systems
The service- and maintenance operator must have
knowledge of the following components :
• Diodes
• Z-Diodes
(Zener-Diodes)
• Rectifi ers (2phases and 3phases)
•
Power transistor (IGBT)
The operator must know how to measure the electric
potential, current and resistors by means of a digital
multimeter. He also has to know how to check diodes with a
diodes tester.