GE JGP637 - Manual (Page 18)

A2
A1
The following MINIMUM clearance
dimensions must be maintained.
A3
To insure accuracy, it is best to make
a template when cutting the opening
in the counter.
A4
The recommended Gas Supply
Location from the backwall.
Overall cooktop dimensions
Cutout dimensions
of the countertop
18
Installation Instructions
A5
Make sure the wall coverings,
countertop and cabinets around the
cooktop can withstand heat (up to
200°F) generated by cooktop.
Wall covering,
cabinets and
countertop
must withstand
heat up to 200°F.
COOKTOP
36"
21"
19" 33 3/4"
3 3/16"
2 1/4" Min.
Between cutout
and the wall behind
the cooktop
19 1/8" width of cut
33 7/8"
length of
cut
2 1/2" Min.
from front edge
of cutout
and front edge
of countertop
16 15/16"
3 3/4" MIN.
clearance from
cutout to side
wall on the left
of the unit
30" MIN.
clearance from
countertop to
unprotected
overhead surface
6" MIN.
clearance from
cutout to side
wall on the right
of the unit
13" MAX. Depth
of unprotected
overhead cabinets
18" MIN.
height from
countertop to
nearest cabinet on
either side of unit
From Cutout
Center Line
1" Min. From Backwall
Recommended
gas supply
location.
9"
PREPARING THE OPENING
A