GE JGP637 - Manual (Page 19)

Installation Instructions
B4
Attach Brackets
Insert the hold down
brackets in the slots on
each side of the unit.
B1
Protect the Surface
of the Cooktop
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Bottom of cooktop
Cloth under Cooktop
B2
Locate The Mounting Parts
Remove the hold down
brackets from the
literature package.
B5
Insert Cooktop Into Cutout
Insert the cooktop centered into the cutout
opening. Make sure the front edge of the
countertop is parallel to the cooktop. The unit
must rest on the metal flange around the
burner box. Make final check that all required
clearances are met.
Mounting
Slot
Burner Box
Sides
COOKTOP
B6
Secure Cooktop to Cabinet
Once the unit is in place, screw the hold
down bracket into the cabinet sides to secure
the unit into place.
Mounting
Slot
Burner Box
Sides
Use suitable
fasteners for
anchoring in
cabinet sides
Cabinet
Sides
Installing the Cooktop Unit
B
B3
Attach the Adhesive Strip
(Glass Top Models Only)
Attach the adhesive strip around the maintop
glass as close to the edge as possible.
Cooktop
Burner
Box
Outer edge
of glass bottom
Adhesive Strips
to outer edge
of glass
Countertop
19