Gateway FX542X - Manual (Page 44)

CHAPTER 4: Advanced Hardware Setup
38
7 In the Select a Task list on the left side of the control
panel, under 3D Settings, click Set SLI configuration.
The Set SLI Configuration screen opens.
8 Click Enable SLI technology (recommended), then
click Apply. If the Applications Shutdown Required
message box opens, click Yes.
A message appears on the screen notifying you that SLI
is enabled.
Setting up multiple monitors
If your computer came with a high-end graphics card installed
(number and type may vary), you can connect multiple
monitors for a multi-screen panel array. To set up multiple
monitors, see the “Customizing Windows” chapter in your
online User Guide.
8513162.book Page 38 Tuesday, May 20, 2008 4:09 PM