Gateway FX542X - Manual (Page 59)

www.gateway.com
53
9 Turn on your computer. Windows starts and the
Windows desktop appears.
10 Click (Start), right-click Computer, then click
Properties. The amount of memory in your computer
is displayed.
Adding or replacing an optical
disc drive
To add or replace an optical disc drive:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 47 .
2 Remove the front bezel by following the instructions in
“Removing the front bezel” on page 49 .
3 If you are installing a new drive, slide the drive release
latch toward the back of the computer, then go to Step
7 .
- OR -
If you are replacing an existing drive, disconnect the
cables from the drive, noting their locations and
orientation. You will reconnect the cables after you
install the new drive.
Important
The color and shape of your replacement drive's front cover may
vary from your original drive.
8513162.book Page 53 Tuesday, May 20, 2008 4:09 PM