Gateway FX542X - Manual (Page 71)

www.gateway.com
65
9 Reconnect the power supply cables using your notes
from Step
2 .
10 Replace the side panel by following the instructions in
“Replacing the side panel” on page 50 .
Replacing the heat sink and
processor
To replace the heat sink and processor:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 47 .
2 For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
3 Remove the fan cover by holding cables out of the way
and pulling the cover away from the computer.
Tools
You need a Phillips screwdriver to replace the heat sink.
8513162.book Page 65 Tuesday, May 20, 2008 4:09 PM