Gateway FX542X - Manual (Page 57)

www.gateway.com
51
2 Insert the bottom edge of the side panel into the inside
bottom edge of the computer, then swing the side panel
in toward the top of the computer to secure it into place.
3 Replace the side panel thumbscrew.
4 Reconnect the cables and power cord.
Adding or replacing memory
When you upgrade the computer memory, make sure that you
install the correct type of memory module for your computer.
Your computer uses DIMM memory.
To install or replace DIMM memory:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 47 .
2 For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
8513162.book Page 51 Tuesday, May 20, 2008 4:09 PM