Genie IWP Super Series 48643 - Manual (Page 4)

2 Genie IWP Super Series Part No. 48643
Operator’s Manual Second Edition • Fourth Printing
SAFETY RULES
Tip-over Hazards
Do not raise the platform unless the machine is on
a firm, level surface.
Do not move the machine while the platform is
raised.
Do not cause a horizontal force or side load to the
machine by raising or lowering a fixed or
overhanging load.
Do not place or attach overhanging loads to any
part of this machine.
Do not place ladders or scaffolds in the platform or
against any part of this machine.
Do not push off or pull toward any object outside
the platform.
Maximum allowable 45 lbs
manual force 200 N
Do not use the machine to lift material or
equipment. The machine is intended to lift
personnel and tools to an aerial work site.
Do not operate the machine near drop-offs, holes,
bumps, debris, unstable or slippery surfaces or
other possible hazardous conditions.
Do not use the machine on a moving or mobile
surface or vehicle.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed to
the wind will decrease machine stability.
Do not exceed the rated platform load capacity.
Maximum capacity -
ANSI & CE
350 lbs 159 kg
Maximum capacity -
CSA
300 lbs 136 kg
Maximum capacity 300 lbs 136 kg
IWP-20S with outreach option
Maximum occupancy 1 person