Genie IWP Super Series 48643 - Manual (Page 6)

4 Genie IWP Super Series Part No. 48643
Operator’s Manual Second Edition • Fourth Printing
Allow for platform movement, electrical line
sway or sag and movement due to strong or
gusty winds.
Do not use the machine as a ground for welding.
Do not operate an AC powered machine or a
DC battery charger unless using a 3-wire grounded
extension cord connected to a grounded AC circuit.
Do not alter or disable 3-wire grounded plugs.
Collision Hazards
Check the work area for overhead obstructions or
other possible hazards.
Be aware of crushing hazard when grasping the
platform guard rail.
Do not lower the platform
unless the area below is
clear of personnel and
obstructions.
Use common sense and
planning to control the
movement of the machine
on or near inclines.
Stay clear of descending platform.
SAFETY RULES
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Be sure all maintenance has been performed
as specified in this manual and the Genie IWP
Super Series service manual.
Be sure all decals are in place and legible.
Be sure the operator’s, safety and responsibilities
manuals are complete, legible and in the storage
container located on the mast.
Conduct a thorough pre-operation inspection
of the machine and test all functions before each
work shift.
Do not use the machine as a ground for welding.
Improper Use Hazard
Do not leave the machine unattended unless the
key is removed to secure from unauthorized use.
Bodily Injury Hazard
Do not operate the machine with a hydraulic oil or
air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.