Garmin GPSMAP 6212 - Manual (Page 100)

 GPSMAP ® 6000/7000 Series Owner’s Manual
Radar
Shifting the Field of View on the Radar Screen
You can shift your current location toward the bottom of the screen automatically as your speed
increases. Enter your top speed for the best results. This setting applies to every radar mode. This
setting does not apply to the Radar Overlay.
1. From the Home screen, select
Radar > Radar Setup > Appearance > Look-Ahd Spd > on .
2. Enter the speed:
For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad.
For the GPSMAP 7000 series, use the on-screen keyboard.
3. Select Done .
Radar Navigation Settings
Showing the Heading Line on the Radar Screen
You can show an extension from the bow of the boat in the direction of travel on the Radar screen.
This setting does not apply to the Radar Overlay.
From the Home screen, select Radar > Radar Setup > Appearance > Heading Line > Show .
Showing and Hiding Range Rings on the Radar Screen
The range rings help you to visualize distances on the Radar screen. This setting does not apply to
the Radar Overlay.
From the Home screen, select Radar > Radar Setup > Appearance > Rings > Show .
Showing Navigation Lines on the Radar Screen
The navigation lines indicate the course you have set using Route To, Guide To, or Go To. This
setting does not apply to the Radar Overlay.
From the Home screen, select Radar > Radar Setup > Appearance > Nav Lines > Show .
Radar Scanner and Antenna Settings
Setting the Antenna Rotation Speed
Note: You can set the rotation speed for GMR 18, 18 HD, 24, 24 HD, 404, 406, 604 xHD, 606
xHD, 1204 xHD, or 1206 xHD radar only. The antenna does not rotate at high speed in Dual Range
mode.
1. From the Home screen, select
Radar > Radar Setup > Rotation Spd .
2. Complete an action:
Select Normal Speed .
Select High Speed to increase the speed at which the antenna rotates, which increases the
speed at which the screen updates.
•
•
•
•