Garmin GPSMAP 6212 - Manual (Page 112)

06 GPSMAP ® 6000/7000 Series Owner’s Manual
Sonar
Setting the Fish Alarm
You can set an alarm to sound when the chartplotter detects a suspended target of the specified
symbols.
1. From the Home screen, select
Configure > Alarms > Sonar > Fish .
2. Complete an action:
Select to sound an alarm for all fish sizes.
Select to sound an alarm for medium and large fish only.
Select to sound an alarm for large fish only.
Transducer Configuration
Setting the Keel Offset
The keel offset compensates for the surface reading for the depth of a keel, making it possible to
measure depth from the bottom of the keel instead of from the transducer location. Enter a positive
number to offset for a keel. You can enter a negative number to compensate for a large vessel that
may draw several feet of water.
1. Complete an action, based on the location of the transducer:
If the transducer is installed at the water line, measure the distance from the transducer
location to the keel of the boat. Enter this value in step 3 as a positive number.
If the transducer is installed at the bottom of the keel, measure the distance from the
transducer to the water line. Enter this value in step 3 as a negative number.
Transducer at the water line
Transducer at the bottom of
the keel
Keel Offset
A (+) positive number
shows depth at the bottom
of the keel.
A (-) negative number
shows depth at the surface.
2. From the Home screen, select Configure > My Boat > Keel offset .
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the distance
measured in step 1. Ensure that you enter a positive or a negative number based on the
location of the transducer.
For the GPSMAP 7000 series, use the on-screen keyboard to enter the distance measured
in step 1. Ensure that you enter a positive or a negative number based on the location of the
transducer.
4. Select Done .
•
•
•
•
•
•
•