Garmin GPSMAP 6212 User Manual

Page 59

Advertising
background image

GPSMAP

®

6000/7000 Series Owner’s Manual



Almanac, Environmental, and On-boat Data

Selecting the Engines Shown in Gauges

You must manually select the number of engines shown in the engine gauges (

page 52

) before you

can select the engines for which information appears in the gauges.
1. From the Home screen, select

Information

>

engines

>

Menu

>

Gauge Setup

>

engine

Selection

.

2. Select

First engine

.

3. Enter the number of the engine (1 through 8) for which you want to view information in the first

gauge or bar:

For the GPSMAP 6000 series, use the Rocker or Numeric Keypad.
For the GPSMAP 7000 series, use the on-screen keyboard.

For example, if you select “6,” the first engine gauge or bar shows information for the engine

identified as “Engine6” on the NMEA 2000 network.

4. Select

Done

.

5. Repeat steps 3 and 4 for the second, third, and fourth engine gauge or bar, as needed.

Fuel Gauges

A maximum of two fuel gauges, an upper gauge and a lower gauge, appear above and below the

speedometer in the center of the Fuel Gauges page. You must have fuel level sensors in your fuel

tanks or a fuel flow sensor to capture the data shown in the fuel gauges.
If you use only a fuel flow sensor, the amount of fuel onboard is the estimated fuel level, and it is

based on the total tank size, the recorded amount of fuel in the tanks, and the fuel flow rate.
The number and configuration of fuel gauges that appear is based on the number and type of onboard

fuel data sensors, as shown below.

0 Fuel Level Sensors

1 Fuel Level Sensor

2 or More Fuel Level
Sensors

0 Fuel Flow

Sensors

No fuel gauges appear.

Upper fuel gauge appears.

Upper and lower fuel gauges

appear.

1 or More Fuel

Flow Sensors

Upper fuel gauge appears

with estimated fuel level.

Upper fuel gauge appears.

Upper and lower fuel gauges

appear.

Viewing Fuel Gauges

To view fuel information, your chartplotter must be connected to an external fuel sensor, such as the

Garmin GFS

10.

1. From the Home screen, select

Information

>

engines

.

2. Move from the engine gauge screens to the fuel gauge screen:

For the GPSMAP 6000 series, use the Rocker.
For the GPSMAP 7000 series, select the left and right arrows at the top of the page.

Customizing Gauge Limits

See “Customizing Engine and Fuel Gauge Limits” (

page 51

).



Advertising
This manual is related to the following products: