Restore the default value of the ftc setting, See “restoring the default rain clutter setting, See “restoring the default ftc setting – Garmin GPSMAP 6212 User Manual
Page 95
GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
3. Complete an action:
Select
Menu
>
Noise Rejection
>
Sea Clutter
for Cruising, Harbor, Offshore, or Sentry
mode.
Configure the setting for the short-range screen in Dual Range mode. Select
>
Menu
>
Noise Rejection
>
Sea Clutter
for the GPSMAP 6000 series. Select
Left
>
Noise Rejection
>
Sea Clutter
for the GPSMAP 7000 series.
Configure the setting for the long-range screen in Dual Range mode. Select
>
Menu
>
Noise Rejection
>
Sea Clutter
for the GPSMAP 6000 series. Select
Right
>
Noise Rejection
>
Sea Clutter
for the GPSMAP 7000 series.
4. Select a setting that reflects present sea conditions: Rough, Medium, or Calm.
5. Select
Up
or
Down
to decrease or increase the appearance of sea clutter until other targets are
clearly visible on the Radar screen.
Clutter caused by sea conditions may still be visible.
Restoring the Default FTC Setting
Note: Depending upon the radar in use, the FTC setting configured for use in one radar mode may
or may not be applied to other radar modes or to the Radar Overlay (
1. From the Home screen, select
Radar
.
2. Select
Cruising
,
Harbor
,
offshore
,
Dual Range
or
Sentry
mode.
3. Complete an action:
Select
Menu
>
Noise Rejection
>
FtC
>
off
for Cruising, Harbor, Offshore, or Sentry mode.
Configure the setting for both screens in Dual Range mode. Select
>
Menu
>
Noise
Rejection
>
FtC
>
off
for the GPSMAP 6000 series. Select
Left
>
Noise Rejection
>
FtC
>
off
for the GPSMAP 7000 series.
Restoring the Default Rain Clutter Setting
Note: Depending upon the radar in use, the rain clutter setting configured for use in one radar
mode may or may not be applied to other radar modes or to the Radar Overlay (
1. From the Home screen, select
Radar
.
2. Select
Cruising
,
Harbor
,
offshore
,
Dual Range
or
Sentry
mode.
3. Complete an action:
Select
Menu
>
Noise Rejection
>
Rain Clutter
>
off
for Cruising, Harbor, Offshore, or
Sentry mode.
Configure the setting for the short-range screen in Dual Range mode. Select
>
Menu
>
Noise Rejection
>
Rain Clutter
>
off
for the GPSMAP 6000 series. Select
Left
>
Noise
Rejection
>
Rain Clutter
>
off
for the GPSMAP 7000 series.
Configure the setting for the long-range screen in Dual Range mode. Select
>
Menu
>
Noise Rejection
>
Rain Clutter
>
off
for the GPSMAP 6000 series. Select
Right
>
Noise
Rejection
>
Rain Clutter
>
off
for the GPSMAP 7000 series.
•
•
•
•
•
•
•
•