Garmin GPSMAP 6212 - Manual (Page 84)

7 GPSMAP ® 6000/7000 Series Owner’s Manual
Radar
Assigning a MARPA Tag to an Object
Note: MARPA requires the use of a heading sensor and an active GPS signal. The heading sensor
must provide the NMEA 2000 parameter group number (PGN) 127250, or the NMEA 0183 HDM or
HDG output sentence.
1. From the Home screen, select
Radar .
2. Select Cruising , Harbor , or offshore .
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker to select an object or location.
For the GPSMAP 7000 series, touch an object or location.
Target
Target options
4. Select Acquire target .
Removing a MARPA Tag from a Target Object
1. From the Home screen, select Radar .
2. Select Cruising , Harbor , or offshore .
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker to select a targeted object.
For the GPSMAP 7000 series, touch a targeted object.
4. Select MARPA target > Remove .
Viewing Information about a MARPA-tagged Object
You can view the range, bearing, speed, and other information about a MARPA-tagged object.
1. From the Home screen, select
Radar .
2. Select Cruising , Harbor , or offshore .
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker to select a targeted object.
For the GPSMAP 7000 series, touch a targeted object.
4. Select MARPA target .
•
•
•
•
•
•