Step 2 - connect audio, 1 stereo audio, 2 5.1 channel analog audio – GoVideo DVP1100 User Manual

Page 12: 3 digital audio (coaxial), 4 digital audio (optical), Step 3 - turn on player, Step 4 - turn on tv/audio system, 1 turn on your tv and/or audio system, 4 the sonicblue dvd background image will appear, Dvp1 100 dvd player

Advertising
background image

8

DVP1

100 DVD Player

Step 2 - Connect Audio

Choose one of four audio connection methods:

1 Stereo Audio

Connect to the left/right audio inputs of your TV,

stereo or 2-channel analog amplifier. With this connection, all Analog

Out options should be set to 2 channel; please refer to page 13.

2 5.1 Channel Analog Audio

Connect to the analog audio inputs

of your 5.1 channel amplifier. With this connection, all Analog Out

options should be set to 6 channel; please refer to page 13.

3 Digital Audio (Coaxial)

Connect to the coaxial digital audio

input of your amplifier. With this connection, all Digital Out options

should be set to PCM or bitstream; please refer to page 13.

4 Digital Audio (Optical)

Connect to the optical digital audio

input of your amplifier. With this connection, all Digital Out options

should be set to PCM or bitstream; please refer to page 13.

Step 3 - Turn on Player

1

Connect the power cord to a standard 120VAC/60Hz electrical outlet.

2

Press the POWER button on the front panel to turn on the unit.

Step 4 - Turn on TV/Audio System

1

Turn on your TV and/or audio system.

2

Set your TV to the audio/video input to which you connected the DVD player.

3

Set your audio system (TV, stereo or amplifier) to the audio input to which you connected the DVD player.

4

The SONICblue DVD background image will appear.

When the front panel POWER button is pressed in, the red Power LED on the front panel will

light and the player’s internal circuitry is connected to the wall outlet. When the front panel

POWER button is released, the player is effectively disconnected from the wall outlet and the

red LED will turn off .

The remote control POWER button only switches between On and Standby mode (low power

mode).

Refer to the owner’s manuals for your TV and/or audio system regarding connections and

audio/video input selection.

Please continue with Chapter 3 to set your DVD player preferences.

FRONT(L) FRONT(R) SUB W.

SUR.(L)

5.1 CHANNEL

SUR.(R) CENTER

VIDEO

R

L

COAXIAL

OPTICAL

DIGITAL

AUDIO

Y

Pb

Pr

S-VIDEO

Digital Audio

(Coaxial)

5.1 Channel

Analog Audio

Digital Audio

(Optical)

Stereo

Audio

1

3

2

4

UG.book Page 8 Thursday, January 9, 2003 10:05 AM

Advertising