GoVideo DVP1100 - Manual (Page 16)

12
DVP1
100 DVD Player
:: Video Setup
The Video menu allows you to set your preferred aspect ratio for DVD movies and specify your Video connection method.
TV Aspect
TV Aspect adjusts the format of the video output to match your television and
viewing preference. The aspect ratio of standard television screens is 4:3 (4
units wide to 3 units tall). Widescreen televisions are 16:9.
1
From Stop mode, press SETUP.
2 Select Video and press ENTER.
3 Select TV Aspect and press ENTER.
4 Select the desired TV Aspect and press ENTER:
Fullscreen (default) Select if you have a standard 4:3 television and
prefer to watch full-screen versions of DVD movies (if available).
Letterbox Select if you have a standard 4:3 television and prefer to
watch widescreen versions of DVD movies (if available). Movies will display in letterbox format; i.e., black bars will appear
above and below the picture.
Widescreen Select if you have a widescreen 16:9 television.
5 Press SETUP to save and exit.
Video Output
Set Video Output to match the method you used to connect to your TV.If you
used Composite Video, you do not have to adjust this setting.
1
From Stop mode, press SETUP.
2 Select Video and press ENTER.
3 Select Video Out and press ENTER.
4 Select the desired Video Out and press ENTER:
S-Video (default) Select if you connected the DVD player to your TV
using the S-Video output.
Component Select if you connected the DVD player to your TV using
the Component Video output.
5 Press SETUP to save and exit.
UG.book Page 12 Thursday, January 9, 2003 10:05 AM