Document Outline

• Table of Contents
  • 1 - Getting Started
  • 2 - Connections
  • 3 - Setup
  • 4 - Basic Operations
  • 5 - Advanced Features
  • 6 - Help
• Chapter 1 Getting Started
  • :: Welcome
    • Features
    • Compatible Discs
  • :: Player Overview
    • Remote Control
      • 1 POWER
      • 2 ARROW KEYS Y/B/A/"
      • 3 ENTER
      • 4 PAUSE/STEP
      • 5 PLAY
      • 6 NEXT ""|
      • 7 PREV |AA
      • 8 0-9
      • 9 CLEAR
      • 10 OPEN/CLOSE
      • 11 RETURN
      • 12 STOP
      • 13 MENU
      • 14 REW AA
      • 15 FF ""
      • 16 SEARCH
      • 17 A-B
      • 18 TITLE
      • 19 ANGLE
      • 20 ZOOM
      • 21 ENHANCE
      • 22 MEMORY
      • 23 SETUP
      • 24 DISPLAY
      • 25 PLAY MODE
      • 26 SLOW
      • 27 SUBTITLE
      • 28 AUDIO
      • 29 KARAOKE
      • 30 PS/IS
      • 31 SPECTRUM
      • 32 VOL/CH
      • 33 PANEL DOOR
    • Front Panel Controls
      • 1 POWER
      • 2 Power LED
      • 3 MIC 1/2
      • 4 VOL +/-
      • 5 ECHO +/-
      • 6 Disc Tray
      • 7 PREV/NEXT |AA/""|
      • 8 REV/FF AA/""
      • 9 OPEN/CLOSE
      • 10 STOP
      • 11 PLAY
      • 12 Front Panel Display
      • 13 PAUSE
    • Front Panel Display
      • 1 DVD Indicator
      • 2 Play Status Indicator
      • 3 PBC Indicator
      • 4 Track Indicator
      • 5 Time Indicator
      • 6 DTS Indicator
      • 7 VCD/SVCD Indicator
      • 8 MP3 Indicator
      • 9 Play Indicator
      • 10 Repeat Status Indicator
      • 11 Pause Indicator
      • 12 Dolby Digital Indicator
    • Rear Panel
      • 1 Composite Video Output
      • 2 Stereo Audio Output
      • 3 Digital Audio Out (Coaxial)
      • 4 Component Video Output
      • 5 S-Video Output
      • 6 Digital Audio Out (Optical)
      • 7 5.1 Channel Audio Outputs
• Chapter 2 Connections
  • :: Connecting the Player
    • Step 1 - Connect Video
      • 1 Composite Video
      • 2 S-Video
      • 3 Component Video
    • Step 2 - Connect Audio
      • 1 Stereo Audio
      • 2 5.1 Channel Analog Audio
      • 3 Digital Audio (Coaxial)
      • 4 Digital Audio (Optical)
    • Step 3 - Turn on Player
      • 1 Connect the power cord to a standard 120VAC/60Hz electrical outlet.
        • 2 Press the POWER button on the front panel to turn on the unit.
    • Step 4 - Turn on TV/Audio System
      • 1 Turn on your TV and/or audio system.
        • 2 Set your TV to the audio/video input to which you connected the DVD player.
        • 3 Set your audio system (TV, stereo or amplifier) to the audio input to which you connected the D...
        • 4 The SONICblue DVD background image will appear.
• Chapter 3 Setup
  • :: Setup Menu Overview
    • Setup Menu Categories
      • 1 For Language settings; see page10.
        • 2 For Video settings; see page12.
        • 3 For Audio settings; see page13. For More Audio settings; see page16.
        • 4 For Rating settings; see page17.
    • Setup Menu Navigation
      • SETUP
      • A/"
      • ENTER
      • Y/B
  • :: Language Setup
    • OSD Menu Language
      • 1 From Stop mode, press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select OSD Menu and press ENTER.
        • 4 Set the OSD Menu Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
    • Subtitle Language
      • 1 From Stop mode, press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select Subtitle and press ENTER.
        • 4 Set the Subtitle Language to English, French, Spanish, Auto or Off and press ENTER.
        • 5 Press SETUP to save and exit.
    • Audio Language
      • 1 From Stop mode, press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select Audio and press ENTER.
        • 4 Set the desired Audio Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
    • Disc Menu Language
      • 1 From Stop mode, press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select Disc Menu and press ENTER.
        • 4 Set the desired Disc Menu Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
  • :: Video Setup
    • TV Aspect
      • 1 From Stop mode, press SETUP.
        • 2 Select Video and press ENTER.
        • 3 Select TV Aspect and press ENTER.
        • 4 Select the desired TV Aspect and press ENTER:
        • Fullscreen
        • Letterbox
        • Widescreen
          • 5 Press SETUP to save and exit.
    • Video Output
      • 1 From Stop mode, press SETUP.
        • 2 Select Video and press ENTER.
        • 3 Select Video Out and press ENTER.
        • 4 Select the desired Video Out and press ENTER:
        • S-Video
        • Component
          • 5 Press SETUP to save and exit.
  • :: Audio Setup
    • Dolby Digital Setting
      • 1 From Stop mode, press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select Dolby D and press ENTER.
        • 4 Set Analog Out to:
        • 6 Channel
        • 2 Channel
        • To output downmixed 2 channel stereo from the stereo audio outputs; e.g., to a VCR or TV.
          • 5 Set Digital Out to:
        • PCM
        • Bitstream
        • Off
          • 6 Press SETUP to save and exit.
    • DTS Setting
      • 1 From Stop mode, press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select DTS and press ENTER.
        • 4 Set Analog Out to:
        • 6 Channel
        • 2 Channel
        • To output downmixed 2 channel stereo from the stereo audio outputs; e.g., to a VCR or TV.
        • Off
          • 5 Set Digital Out to:
        • PCM
        • Bitstream
        • Off
          • 6 Press SETUP to save and exit
    • MP3 Setting
      • 1 From Stop mode, press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select MP3 and press ENTER.
        • 4 Set Digital Out to:
        • PCM
        • Off
          • 5 Press SETUP to save and exit
    • CD/VCD Setting
      • 1 From Stop mode, press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select CD/VCD and press ENTER.
        • 4 Set Analog Out to:
        • 2 Channel
        • (default) To output 2 channel stereo audio from the stereo audio outputs; e.g., to a VCR or TV.
        • 6 Channel
          • 5 Set Digital Out (from Optical Out) to:
        • PCM
        • Bitstream
        • Off
          • 6 Press SETUP to save and exit.
  • :: More Audio Setup
    • Pro Logic Setting
      • 1 From Stop mode, press SETUP.
        • 2 Select More Audio and press ENTER.
        • 3 Select Pro Logic and press ENTER.
        • 4 Select the desired Pro Logic setting and press ENTER:
        • Auto
        • On
        • Off
          • 5 Press SETUP to save and exit.
    • Subwoofer Setting
      • 1 From Stop mode, press SETUP.
        • 2 Select More Audio and press ENTER.
        • 3 Select Subwoofer and press ENTER.
        • 4 Select the desired Subwoofer setting and press ENTER:
        • On
        • Off
          • 5 Press SETUP to save and exit.
  • :: Rating Setup
    • Setting the Password & Rating Level
      • 1 From Stop mode, press SETUP.
        • 2 Select Rating and press ENTER.
        • 3 Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive) to 8 (leas...
        • 4 Select Password.
        • 5 Use the 0-9 keys to enter a 4-digit password and press ENTER. The lock icon will close to indic...
        • 6 Press SETUP to save and exit.
    • Restore Defaults
      • 1 From Stop mode, press SETUP.
        • 2 Select Rating and press ENTER.
        • 3 Select Restore Default and press ENTER.
        • 4 Select the desired setting and press ENTER:
        • No
        • Yes
          • 5 Press SETUP to save and exit.
• Chapter 4 Basic Operations
  • :: Basic Disc Playback
    • Playing a DVD, CD or VCD
      • 1 Turn on the TV.
        • 2 Set the TV to the AV input connected to the DVD player.
        • 3 Turn down the volume on your amplifier and then power it on.
        • 4 Set the amplifier to the AV input connected to the DVD player.
        • 5 Press the POWER button on the front panel of the DVD player.
        • 6 Press OPEN/CLOSE on the remote control or front panel to open the disc drawer.
        • 7 Place the disc in the drawer with the label side facing up and playback side facing down. If th...
        • 8 Press OPEN/CLOSE again to close the disc drawer.
        • 9 Press PLAY on the remote control or front panel. Many discs will load and begin playing automat...
        • 10 Adjust the volume of the player by pressing the VOL/CH button on the remote control, then usin...
    • Disc Menu Navigation
      • MENU
      • A/"/Y/B
      • ENTER
      • 0-9
      • RETURN
    • Additional Disc Playback Options
• Chapter 5 Advanced Features
  • :: Special Playback Features
    • Search
      • 1 Press SEARCH during DVD/CD playback.
        • 2 Use the arrow keys to select Time, Title/Chapter or Track.
        • 3 Use the 0-9 keys to enter the desired time (counter position in hours, minutes and seconds), ti...
        • 4 Press ENTER to jump to the desired time, title/chapter or track.
    • Title
      • 1 Press the TITLE button on the remote control.
        • 2 Press the arrow keys or the 0-9 buttons to select a title for playback.
        • 3 Press ENTER to start playback of the selected title.
    • A-B Repeat
      • 1 Press A-B during DVD/CD playback to select point A.
        • 2 Press A-B again to select point B. The minimum A-B Repeat time is 5 seconds.
        • 3 The segment will begin repeating in a continuous loop.
        • 4 To cancel, press A-B again.
    • Zoom
      • 1 Press ZOOM during DVD playback to display the magnifying glass.
        • 2 Continue to press ZOOM to select among 3 levels of magnification. Press ZOOM a fourth time to t...
    • Angle
      • 1 Press ANGLE when you see the Angle icon appear on screen during DVD playback.
        • 2 Continue to press ANGLE to select among all available angles on the disc. The Angle feature is ...
    • Subtitle
      • 1 Press SUBTITLE during DVD playback.
        • 2 Continue to press SUBTITLE to select among all available subtitle languages.
    • Audio
      • 1 Press AUDIO during DVD playback.
        • 2 Continue to press AUDIO to select among all available audio formats.
    • Enhance
      • 1 During playback, press ENHANCE.
        • 2 Select Brightness or Edges, and press ENTER to set as follows:
        • Brightness
        • Adjusts the overall brightness of the picture. Choose On for increased brightness or Off for redu...
        • Edges
          • 3 Press SETUP to save and exit.
    • Memory
      • 1 Press MEMORY during DVD/CD playback to set the bookmark.
        • 2 Press MEMORY again to return to the bookmark
    • PS/IS
      • 1 While playback is stopped, press PS/IS twice to switch to Progressive Scan mode.
        • 2 Press PS/IS once to switch back to Interlace Scan mode.
      • 1 Press DISPLAY once to view elapsed/remaining time.
        • 2 Press DISPLAY again for detailed disc information, including disc type, title number, chapter n...
        • 3 Press DISPLAY again to turn off the display.
    • Vol/Channel
      • 1 During playback, press VOL/CH.
        • 2 Select Volume and then use the left/right arrow keys to adjust the volume level.
        • 3 Select Channel and then use the left/right arrow keys to select the desired audio channnel (STE...
      • 1 During CD/VCD playback, press SPECTRUM to view the graphical spectrum.
        • 2 Press SPECTRUM again to turn off the spectrum.
  • :: Play Mode
    • Program Playback
      • 1 Press PLAY MODE.
        • 2 Select Program and press ENTER.
        • 3 Use the arrow keys to move the cursor to one of the 12 empty placeholders.
        • 4 Use the 0-9 keys to enter the number of the title/chapter or track you wish to add to your play...
        • 5 Repeat this process until all chapters/tracks are added in the desired order.
        • 6 Move the cursor to Play Program and then press ENTER. The disc will play in the programmed order.
        • 7 To cancel Programmed Play, first return to the Program menu as described above. Next, select “C...
        • 8 Press PLAY MODE to exit the Program menu.
    • Repeat
      • 1 Press PLAY MODE.
        • 2 Select Repeat and press ENTER.
        • 3 Continue to press ENTER to select Repeat Title, Repeat Chapter, or Repeat Off (DVD); or Repeat ...
        • 4 Press PLAY MODE to exit the Program menu.
    • PBC Control
      • 1 Press PLAY MODE.
        • 2 Select PBC and then press ENTER.
        • 3 Continue to press ENTER to toggle PBC on and off.
        • 4 Press PLAY MODE to exit the Program menu.
  • :: MP3 Playback
    • 1 Insert a CD-R/CD-RW disc with MP3 files into the DVD disc tray.
      • 2 To select a different directory, highlight the name of the current directory and press ENTER. R...
      • 3 To play a track, use the arrow keys to navigate to the desired track and press ENTER to select.
      • 4 To skip to the next or previous track, press NEXT or PREV.
      • 5 To stop playback, press STOP.
  • :: Photo CD Playback
    • 1 Insert a Photo CD into the DVD disc tray.
      • 2 A slideshow of all images on the disc will begin playing automatically.
      • 3 To browse images during the slideshow:
      • 4 To manipulate images during the slideshow:
  • :: Karaoke Playback
    • 1 Connect one or two microphones to the front panel MIC 1/2 jacks.
      • 2 Insert a Karaoke CD into the DVD disc tray.
      • 3 Select the desired Chapter/Track in the disc menu.
      • 4 Press KARAOKE to toggle the Karaoke feature on and off.
      • 5 Adjust the microphone volume with the front panel VOL +/- keys.
      • 6 Adjust the microphone echo with the front panel ECHO +/- keys.
      • 7 Press VOL/CH on the remote control to select the desired singing mode: Stereo, Left, Right, Lef...
• Chapter 6 Help
  • :: Customer Service Information
    • Phone
    • E-Mail
    • Web
  • :: Troubleshooting
  • :: Technical Specifications
    • General
      • Power Requirements
      • Power Consumption
      • Video Standard
      • Unit Weight (approx.)
      • Unit Dimensions (approx.)
    • Video
      • Video Out
      • S-Video Out
      • Component Video Out
    • Audio
      • Analog Out
      • Coaxial Out
      • Optical Out
      • Frequency Response
      • Signal-to-noise Ratio
      • Total Harmonic Distortion
  • :: Warranty
    • Who Provides the Limited Warranty
    • Who is Protected
    • What is Covered and How Long
    • What the Owner Must Do If Service is Required
    • What are the Exceptions
    • Go-Video Warranty Administrator
  • :: Safety
    • Important Safety Instructions
      • 1 Read Instructions
      • 2 Retain Instructions
      • 3 Heed Warnings
      • 4 Follow Instructions
      • 5 Cleaning
      • 6 Attachments
      • 7 Water and Moisture
      • 8 Accessories
      • 9 Ventilation
      • 10 Power Sources
      • 11 Grounding or Polarization
      • 12 Power–Cord Protection
      • 13 Protective Attachment Plug
      • 14 Outdoor Antenna Grounding
      • 15 Lightning
      • 16 Power Lines
      • 17 Overloading
      • 18 Object and Liquid Entry
      • 19 Servicing
      • 20 Damage Requiring Service
      • 21 Replacement Parts
      • 22 Safety Check
      • 23 Wall or Ceiling Mounting
      • 24 Heat
    • Safety/Regulatory Information
      • Caution
      • WARNING:
      • CLASS 1 LASER PRODUCT
      • Note to CATV System Installer
      • User/Installer Caution
      • Cuidado
      • Attention
    • Notes about Discs
      • On handling discs
      • On cleaning discs
        • 0-9
        • A
        • B
        • C
        • D
        • E
        • F
        • I
        • K
        • L
        • M
        • N
        • O
        • P
        • R
        • S
        • T
        • V
        • W,X,Y,Z
  • :: Setup Menu Tree