Technical specifications, General, Power requirements – GoVideo DVP1100 User Manual
Page 33: Power consumption, Video standard, Unit weight (approx.), Unit dimensions (approx.), Video, Video out, S-video out
29
Connections
Getting Sta
rted
Se
tu
p
Basi
c
Ope
rations
Ad
vanc
e
d
Fe
atures
He
lp
:: Technical Specifications
General
Power Requirements
120 VAC, 60Hz
Power Consumption
<25 W
Video Standard
NTSC
Unit Weight (approx.)
5.5 lbs (2.5 kg)
Unit Dimensions (approx.)
17” x 11.6” x 2.2” (432 x 295 x 56 mm) (w/h/d)
Video
Video Out
1.0Vp-p 75
Ω, sync, negative polarity, RCA pin jack x 1
S-Video Out
(separate Y and C signal output connector)
•
Y: 1.0Vp-p 75
Ω, sync, negative polarity
•
C: 0.286Vp-p 75
Ω
Component Video Out
(Progressive/Interlace Scan modes)
•
Y: 1.0Vp-p 75
Ω
•
Cb: 0.7Vp-p 75
Ω
•
Cr: 0.7Vp-p 75
Ω
Audio
Analog Out
1.85V(rms)/10k
Ω, RCA pin jack (L,R) x 1
Coaxial Out
0.5Vp-p 75
Ω; RCA pin jack x 1
Optical Out
Optical fiber transmitter
Frequency Response
20Hz to 20kHz
Signal-to-noise Ratio
>90dB
Total Harmonic Distortion
Less than 0.05%
Specifications subject to change without notice.
UG.book Page 29 Thursday, January 9, 2003 10:05 AM