Graco FUSION 309550U - Manual (Page 19)

Maintenance
309550U 19
Maintenance
Supplied Tool Kit
• Hex Nut Driver; 5/16
• Screwdriver; 1/8 blade
• Nozzle Drill Bit; various sizes depending on nozzle
size. See T
ABLE 1, page 21.
• Impingement Port Drill Bit; various sizes depending
on port size. See T
ABLE 3, page 22.
• 117661 Pin Vise; dual reversible chucks
• 551189 Grease Gun; with 3 oz grease
• 15B817 Flush Manifold
Not included with spatter spray gun.
Keep Gun Clean
Keep gun clean with accessory gun cover, page 40.
Applying a light coat of lubricant will make cleaning eas-
ier.
As Needed
Daily
Weekly to Monthly
1.
Clean Outside of Gun, page 20.
TI3864a
Reversible
Reversible
2.
Clean Mix Chamber Nozzle, page 21, a minimum
of once a day.
3.
Clean Air Cap, page 20.
4.
Clean Muffler, page 20.
5.
Clean Fluid Manifold, page 20.
6.
Clean Passages, page 21.
7.
Clean Impingement Ports, page 21.
Follow Shutdown, page 14.
1.
Clean Mix Chamber and Side Seal Cartridges,
page 29. Check o-rings.
2.
Clean Check Valves, page 31. Check o-rings and
filters.