Gateway kas303 - Manual (Page 46)

40
Chapter 3: Using the Receiver
www.gateway.com
Yes / None — Select Yes if a subwoofer is connected. Select None if a subwoofer
is not connected.
■ See the specifications of the speakers that you are connecting. For example,
if the frequency range of your speakers is 80 Hz ~ 12 KHz, then the
Crossover Frequency is 80 Hz.
■ If you do not know the specifications for your speakers, try comparing the
sound at both settings (set the volume to a low level so you do not damage
the speakers) to determine the correct setting.
■ Depending on how you set your speakers, not all options may be available
to you. For example, if you set your Front L/R speakers to
Large , you will
have Large , Small , and None as options for your Center speaker. But if you
set your Front L/R speakers to Small , the only options available for your
Center speaker will be Small and None .