Digital audio recording with an md recorder – Gateway kas303 User Manual
Page 67
61
Digital Audio recording with an MD recorder
www.gateway.com
Digital Audio recording with an MD
recorder
■
You can only record digitally (without digital to analog conversion) when
the OPTICAL DIGITAL OUT jack of this receiver is connected to the
OPTICAL DIGITAL IN jack of an MD recorder or CD recorder.
■
Digital recording is available for the digital audio program sources such as
CDs, MDs, and some DVDs.
■
In most DVDs, as well as some CDs, digital recording may not be available
(depending on the signal format).
■
There are some restrictions on recording digital signals. See the operating
instructions of your digital recording equipment to see which restrictions
apply to you.
.
To record digital audio with an MD recorder:
1
Press the
INPUT SELECTOR
button on the receiver or the
AUX
,
VIDEO1
,
VIDEO2
, or
VIDEO3
direct input selector button on the remote control to
select
AUX
,
VIDEO1
,
VIDEO2
, or
VIDEO3
as the input for your recording
source.
2
Press the
DIGITAL INPUT
button on the receiver to select the
o(ptical) 1
,
o(ptical) 2
, or
c(oaxial) 1
as your digital signal input.
3
Start recording on the component connected to
OPTICAL DIGITAL OUT
.
4
Start playing on the selected digital input (recording source).
You can also select the digital signal input using your remote control and the
OSD. For more information, see “Using the OSD” on page 63.