Initializing the receiver – Gateway kas303 User Manual

Page 78

Advertising
background image

72

Chapter 5: Maintaining and Troubleshooting Your Receiver

support..gateway.com

Continuous hissing noise during FM reception, especially when a
stereo broadcast is received.

Change the position of the antenna.

Install an outdoor antenna.

Continuous or intermittent reception, especially at night. hissing noise
during AM

Keep the receiver away from noise sources such as, motors, fluorescent
lamps, and lightning.

Install an outdoor AM antenna.

Remote control unit does not operate.

Replace the batteries.

Remove any obstacles blocking the remote sensor.

OSD function is not available

Make proper video connections.

Initializing the receiver

If the display or operation of the receiver is not performing correctly, you can
initialize the receiver by performing the following procedure.

Initializing the receiver resets any stored settings back to factory defaults. You
will have to reprogram any custom stored settings.

To initialize the receiver:

1

While in Standby mode, press the

SETUP

and

DECODING

buttons at the

same time.

2

After you see the flickering Standby indicator, release the buttons.

Advertising