Gary Fisher Cronos - Manual (Page 13)

13 | GARY FISHER SERVICE INFORMATION
Crankset Installation
sram GXP
These instructions explain how to install a SRAM/TruVativ/Bontrager GXP crankset
(Figure 20) in a new Cronus. To complete the installation, you will also need the SRAM
instructions, available at: http://www.sram.com/_media/techdocs/2005_gxp-05-r5-e.pdf
Tools and materials required
+ Crankset and bottom bracket
+ 8 mm allen wrench
+ Bearing installation tool - PN 404694
+ Rock “N” Roll Super Coat grease
+ Bottom bracket parts
+ TruVativ GXP installation instructions
+ Do not install axle shield that comes in kit 404700
figure 20. sram bearing set
seal Bearing metal seal Bearing with lip (facing in) Wave washer
Part description SRAM
Kit 404700
Ceramic kit 411814
Drive side parts
Bearing 281824
Ceramic
Bearing 293617
Seal 281820
Wave washer 282866
Non-drive side parts
Bearing 282864
Ceramic
Bearing 293618
Seal 282865