Gary Fisher Cronos - Manual (Page 16)

16 | GARY FISHER SERVICE INFORMATION
shimano Hollowtech
These instructions explain how to install a Shimano HollowTech (Figure 29) in a new
Cronus. To complete the installation, you will also need the Shimano instructions, available
at: http://techdocs.shimano.com/media/techdocs/content/cycle/SI/Dura-Ace/FC-7800-
7803/SI_1F30H_En_v1_m56577569830605111.pdf.
Tools and materials required
+ Crankset and bottom bracket
+ Shimano FC16 crank arm installation tool
+ 5 mm Allen Wrench
+ Bearing installation tool PN 404694
+ Rock “N” Roll Super Coat grease
+ Bottom bracket parts
figure 29. shimano bearing set
seal Bearing seal Bearing
Part description Shimano
Kit 404699
Ceramic kit 411813
Drive side parts
Bearing 281824
Ceramic
bearing 295213
Seal 281820
Wave washer -
Non-drive side parts
Bearing 281824
Ceramic
bearing 295213
Seal 281820