At the platform controls – Genie GS-5390 User Manual

Page 19

Advertising
background image

Part No. 82828

Genie GS-3384 & GS-3390 & GS-4390 & GS-5390

17

Operator's Manual

Second Edition • Third Printing

FUNCTION TESTS

Test Up/Down Functions and Function Enable

The audible warnings on this machine come from
the same central alarm. The descent alarm sounds
at 60 beeps per minute. The alarm that goes off
when the machine is not level sounds at 180 beeps
per minute.

7 Do not push the lift function

enable button. Push and hold
the platform up button.

Result: No function should operate.

8 Push and hold the lift function enable button.

Push and hold the platform up button.

Result: The platform should raise.

9 Push and hold the lift function enable button.

Push and hold the platform down button.

Result: The platform should lower. The descent

alarm should sound while the platform is
lowering.

Test the Auxiliary Lowering

10 Push and hold the lift function enable button and

raise the platform approximately 60 cm.

11 Push in the red Emergency Stop button to shut

off the engine.

12 Pull out the red Emergency Stop button to the

on position.

13 Push and hold the lift function enable button.

Push and hold the platform down button.

Result: The platform should lower.

14 Turn the key switch to platform control and

restart the engine.

At the Platform Controls

Test Emergency Stop

15 Push in the platform red Emergency Stop button

to the off position.

Result: No functions should operate.

16 Pull the red Emergency Stop button out to the

on position.

Result: The green power light should come on.

Test the Horn

17 Push the horn button.

Result: The horn should sound.

Test Up/Down Functions and Function Enable

18 Start the engine.

19 Activate the up/down rocker switch in the

direction indicated by the blue arrow.

Result: The platform should not raise.

20 Push and hold the lift function

enable button.

21 Activate the up/down rocker switch

in the direction indicated by the
blue arrow.

Result: The platform should raise.

22 Push and hold the lift function enable button.

23 Activate the up/down rocker switch in the

direction indicated by the yellow arrow.

Result: The platform should lower. The descent

alarm should sound while the platform is
lowering.

Advertising
This manual is related to the following products: