Fall hazards, Collision hazards – Genie GS-5390 User Manual

Page 7

Advertising
background image

Part No. 82828

Genie GS-3384 & GS-3390 & GS-4390 & GS-5390

5

Operator's Manual

Second Edition • Third Printing

Fall Hazards

The guardrail system provides fall protection. If
occupant(s) of the platform are required to wear
personal fall protection equipment (PFPE) due to
job site or employer rules, PFPE equipment and its
use shall be in accordance with the PFPE
manufacturer’s instructions and applicable
governmental requirements.

Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform floor at
all times.

Do not climb down from the platform when raised.

Keep the platform floor clear of debris.

Close the entry gate before operating.

Do not operate the machine unless the guard rails
are properly installed and the entry is secured for
operation.

Collision Hazards

Be aware of limited sight
distance and blind spots
when driving or operating.

Be aware of extended platform position(s) when
moving the machine.

Operators must comply with employer, job site and
governmental rules regarding use of personal
protective equipment.

Check the work area for overhead obstructions or
other possible hazards.

Be aware of crushing hazards when grasping the
platform guard rail.

Observe and use color-coded direction arrows on
the platform controls and platform decal plate for
drive and steer functions.

Do not operate a machine in the path of any crane
or moving overhead machinery unless the controls
of the crane have been locked out and/or
precautions have been taken to prevent any
potential collision.

No stunt driving or horseplay while operating a
machine.

SAFETY RULES

Advertising
This manual is related to the following products: