Genie GS-5390 - Manual (Page 29)

Part No. 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 27
Operator's Manual Second Edition • Third Printing
Observe and Obey:
Only qualified riggers should rig and lift the
machine.
Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for the
machine weight.
Lifting Instructions
Fully lower the platform. Be sure the extension
decks, controls and covers are secure. Remove all
loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two lifting points
on each end of the machine.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Y Axis
X Axis
Center of gravity X Axis Y Axis
GS-3384 1.8 m 97.0 cm
without outriggers
GS-3384 1.9 m 94.5 cm
with outriggers
GS-3390 1.8 m 97.0 cm
without outriggers
GS-3390 1.9 m 94.5 cm
with outriggers
GS-4390 1.8 m 1.0 m
without outriggers
GS-4390 1.9 m 1.0 m
with outriggers
GS-5390 1.9 m 1.0 m
TRANSPORT AND LIFTING INSTRUCTIONS