GE Security DVMRe Triplex 0150-0193G User Manual

Page 14

Advertising
background image

0150-0193G

14

DVMRe Triplex

RJ-45 Pin Configuration For Ethernet Port

Pin

Use

Pin

Use

1

TX+

5

Not Connected

2

TX-

6

RX-

3

RX+

7

Not Connected

4

Not Connected

8

Not Connected

8

2 3 4 5 6 7

1

RJ-45 socket on

back panel.

SCSI and IEEE 1394 archiving devices should not be connected to the DVMRe Triplex
simultaneously. Archiving support is only available for one or the other type of interface at a
time.

SCSI Port

Connector: 50 Pin, High Density SCSI-2.

Gender (on unit) : Female

Compatible devices : DVSe, RAID, DAT, AIT,
CD-R, CD-RW

SCSI ID : 0

The unit is equipped with a SCSI port for
connecting external archive devices. The unit only
supports a single SCSI device. The SCSI ID of the
archive device must be set to 0.

The SCSI bus must be terminated, otherwise the
system will not operate properly.

Additional menu setup may be necessary to
configure archive device. See section 3.15.


IEEE 1394 Firewire Port

The unit is equipped with an IEEE 1394 Firewire port

for connecting Firewire compatible external archive
devices. For information on the approved devices,
please refer to the Archiving Addendum manual that
is supplied with this unit.

Cable: 6 position Firewire

Connectors: 6 position DIP

Caution! Ensure the power to DVMRe Triplex is OFF BEFORE connecting any SCSI or
1394 devices. Do not attempt to use the SCSI and 1394 ports simultaneously.

NOTE

Advertising