GE Security DVMRe Triplex 0150-0193G User Manual

Page 50

Advertising
background image

0150-0193G

50

DVMRe Triplex

q

Main Menu

→ Motion Detection → Enable/Disable Detection

Selecting Enable All or Disable All from this menu will activate or deactivate
motion detection on all cameras.
Selecting Individual Enable from this menu will bring up the following menu.

Individual Enable Menu

Use this menu to enable or disable motion detection on a per
camera basis. Rotate the Jog to navigate, and the Shuttle
to change the values.

q

Main Menu

→ Motion Detection → Setup Parameters

Use this menu to select the Camera, Motion Detection Type, and Sensitivity of the Motion Detection
you wish to configure.

Motion Detection Parameters Setup

[CANCEL] [OK]

Camera

Motion Detection Type

Sensitivity

Relay Output

Link to Event

Rejection

Target Size

Link to Alarm

01

ACTIVITY

06

2

---

LOW

01

NONE

Navigate in this menu using the Jog to select the field and the Shuttle to change the parameters.

Activity Vs. Intrusion

Activity Detection is a simple type of motion detection having only a sensitivity setting and a relay
output. Intrusion Detection is a more sophisticated type of motion detection, with additional features
such as false alarm rejection levels, minimum target size, and an alarm output.

Activity Detection Setup

If Activity is selected in Motion Detection Type field, the following parameters are enabled:
Relay Output: The unit may be configured to activate a relay output when motion detection is
present. Select either 1, 2, 1+2 (both relays), or None.

Enable All

Disable All

Individual Enable

Detection Enable

[CANCEL] [OK]

Camera 01:

Camera 02: Disable

Camera 03: Enable

:

:

Camera 16: Enable

Enable

Advertising