Tcp/ip notification setup, Email address format – GE Security DVMRe Triplex 0150-0193G User Manual

Page 46

Advertising
background image

0150-0193G

46

DVMRe Triplex

Notify Vidloss:

Notify Alarm:

Notify Record:

Notify Archive:

Notify Menu Access:

Notify Power Up:

Notify Connection:

Email User 1:

Email Domain 1:

Email User 2:

Email Domain 2:

SMTP Server:

SMTP Port:

DISABLE

DISABLE

DISABLE

john.doe

somecompany.com

jane.doe

somecompany.com

0. 0. 0. 0

25

DISABLE

DISABLE

DISABLE

ENABLE

Email Notification Setup

Format of email address: user@domain

Warning: Region/Time Zone must be set correctly!

[CANCEL] [OK]

One or more of these

fields must be set to

ENABLE to receive an

email notification of

the selected event.

Obtain the parameters

for these two fields from

your IT Department.

Only if Notify Alarm is set to enable will the email include a link to the video on the disk.
The link pertains only to the alarm start. For more information see section 6.2.

Email Address Format

The format of the email addresses should be entered as follows. If the email address to be notified is

[email protected]

, then john.doe should be entered in one of the Email User fields and

somecompany.com should be entered in the subsequent Email Domain field.

TCP/IP Notification Setup

This screen allows the user to setup the types of events to be notified of, and the IP addresses (up to
two) of the PC(s) where the WaveReader software resides.

WaveReader must be running on the receiving PC(s) and Alarm Monitoring must be setup. See Alarm
Monitoring in the WaveReader Manual for details.

NOTE

Advertising