MITSUBISHI ELECTRIC LT-52244 - Manual (Page 24)

24 3. TV Connections
Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable
VCR to an Antenna or Wall Outlet Cable
Required: Two-way RF splitter, two coaxial cables, right
and left analog audio cables, either S-video or video
cable.
1. Connect the incoming cable or antenna to IN on the
RF splitter.
2. Connect one coaxial cable from OUT on the RF
splitter to ANTENNA IN on the VCR back panel.
3. Connect one coaxial cable from OUT on the RF
splitter to ANT 1/MAIN on the TV back panel. This
connection also allows you to use the TV Guide
Daily feature.
4. To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO OUT
on the VCR to INPUT AUDIO L (MONO) and AUDIO
RIGHT on the TV back panel. If your VCR is mono
(non-stereo), connect only the white (left) cable.
5. Connect either an S-Video or composite video
cable from VIDEO OUT on the VCR back panel to
INPUT VIDEO or S-VIDEO on the TV back panel.
Connect only one type of video cable; S-Video is
recommended, if available.
*/165
47*%&0
7*%&0
-
.0/0
3
3
3
:
1C
1S
3
-
-
.0/0
-
.0/0
   
"73
065
%7*
*/
"6%*0
$0.10/&/5
*/1654
"73
"6%*0
065165
1$%7*
"6%*0
*/165
$0.10/&/5
*/1654
JQQJ
#"$,
*/165
1"/&-

CFMPX
MBCFM
XJUIJO
SFDFTTFE
BSFB

BU
UPQ
"/5
."*/
065
*/ */
*/
3
-.0/0
"6%*0
065
*/
3
-
065
47*%&0
"/5&//"
065
7*%&0
"6%*0
*/
"/5&//"
065
47*%&0
065
- 3
*/
065 065
57
#BDL
1BOFM

57
#BDL
1BOFM





34