MITSUBISHI ELECTRIC LT-52244 - Manual (Page 27)

3. TV Connections 27
Composite Video Connection
Required: Analog stereo audio and composite video
cables supplied with the camcorder.
1. Connect a composite video cable from
VIDEO OUT
on the camcorder to INPUT 3/VIDEO or Y/VIDEO on
the TV.
2. Connect left (white) and right (red) audio cables
from AUDIO OUT on the camcorder to INPUT 3/
AUDIO L and AUDIO R on the TV.
1S
1C

57
4JEF
1BOFM
#PUUPN



Figure 13. Composite video connections for a camcorder
HDMI Connection
Required: HDMI cable supplied with the camcorder.
Connect the camcorder to the TV’s HDMI 4 jack on the
side panel.
Note: Three additional HDMI inputs are located on
Back Panel #2.
1S
1C
57
4JEF
1BOFM
#PUUPN
Figure 15. HDMI connection for a camcorder.
Component Y Pb Pr Video Connection
Required: Analog stereo audio and component video
cables supplied with the camcorder.
1. Connect component video cables from
VIDEO OUT
on the camcorder to one of the TV’s sets of COM-
PONENT INPUTS jacks (TV Back Panel #1 or TV
Side Panel).
2. Connect left (white) and right (red) audio
cables from AUDIO OUT on the camcorder to
COMPONENT 3, L and R jacks on the TV side panel.

57
4JEF
1BOFM
#PUUPN



1S
1C
Figure 14. Component video connections for a camcorder
Camcorder
Inputs on the side of the TV offer the most convenient
way to connect a camcorder.
Jacks on the TV side
panel offer the most
convenient way to
connect a camcorder