MITSUBISHI ELECTRIC LT-52244 - Manual (Page 8)

8 1. Television Overview
A/V Reset
If you wish to reset the A/V (Audio/Video) settings back
to the factory defaults:
• To reset all settings at once, press
GUIDE and FORMAT
on the side panel at the same time.
• To reset the defaults for individual inputs, use the
Reset selection found in the AV menu.
System Reset Button
If the TV does not respond to the remote control, side
panel controls, or will not power on/off, press the
SYSTEM RESET button on the side panel with a pointed
object, such as the point of a pencil or end tip of a
paperclip.
The blue POWER LED will flash quickly for about one
minute. When the blue POWER LED stops flashing, you
may turn on the TV. Recent setting changes you made
before using
SYSTEM RESET may be lost.
TV Side Panel
Side Panel
Buttons
duplicate some
keys on the TV
remote control
Side Panel
Jacks
System Reset
Button (see more
information below)
The side panel contains TV control buttons and addi-
tional input jacks.
See chapter 3,
“TV Connections”
See chapter 4,
“TV Operation
and Features”
Side Panel Input Jacks
COMPONENT 3 Jacks
(five jacks)
INPUT 3
(lower three jacks)
2
3
1
4
1. COMPONENT 3 Inputs (Audio and Video)
Y Pb Pr (480i/480p/720p/1080i)
COMPONENT 3 is a third set of component inputs. Use
these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers,
or compatible video game systems. See Appendix B,
“Specifications,” for signal compatibility.
2. INPUT 3 (Audio and Video)
The
INPUT 3 jacks have multiple uses. The Y/VIDEO
jack can serve either as a yellow composite video jack or
as a green component video jack. The audio jacks can
be used with either the composite or component inputs
nearby on the side panel. The audio jacks also work with
a DVI source connected to
HDMI 4.
3. HDMI 4
HDMI 4 is an HDMI™ input located on the TV’s side panel
for convenience. See item 6, “HDMI Inputs” for descrip-
tion and use. When you connect a DVI device to
HDMI 4,
connect analog audio cables to the nearby INPUT 3 L and
R audio jacks to hear analog audio from the device.
4. USB Photo Port
The USB port is used for viewing JPEG images. See chapter
4, “TV Operation and Features” for more information.