Moxa Technologies 5600 - Manual (Page 37)

NPort 5600 Series User’s Manual Web Console Configuration
Flow control
Setting Factory Default Necessity
None, RTS/CTS, DTR/DSR, Xon/Xoff RTS/CTS Required
FIFO
Setting Factory Default Necessity
Enable, Disable Enable Required
NPort’s serial ports provide a 16-byte FIFO both in the Tx and Rx directions. Disable the FIFO
setting when your serial device does not have a FIFO to prevent data loss during communication.
Interface
Setting Factory Default Necessity
NPort 5610-16/8: RS-232 only RS-232 only Required
NPort 5630-16/8: RS-422/485 only 4-wire 485 Required
Operating Settings
Press Operating Settings located under Main Menu, to display the operating settings for all of
NPort’s serial ports.
5-11