Multi-Tech Systems 40-01459-D0-001 - Manual (Page 16)

10 PCI ESCON Adapter Installation Guide
Windows NT
The PBSA network driver is always required in order to allow Windows NT to
communicate with the adapter. The driver must be installed once for each PCI
ESCON Adapter installed in the system. The following step-by-step procedure will
install the driver into your Windows NT Server.
Step
1. From the Windows NT Server Control Panel, open Network (Figure 3-5).
Figure 3-5. Network ICON on Control Panel
2. From the Adapters tab on the Network screen, click on the Add button (Figure
3-6).