Multi-Tech Systems 40-01459-D0-001 - Manual (Page 39)

TCP/IP Direct Connect 33
9. Click on Bindings. Show bindings for all adapters (Figure 5-18). Check that only
the TCP/IP Protocol is bound to the TCP/IP Direct Connect Adapter. Disable any
other service or protocol bound to TCP/IP Direct Connect.
Figure 5-18. Adapter Bindings
10. Click Close to end network configuration. Windows NT will perform an
automatic bind process. TCP/IP Direct Connect is bound to Microsoft’s TCP/IP
stack on the server. When Windows NT attempts to perform this bind, the
standard Microsoft TCP/IP Properties dialog box will display (Figure 5-19).
Figure 5-19. TCP/IP Properties