Multi-Tech Systems 40-01459-D0-001 - Manual (Page 26)

20 PCI ESCON Adapter Installation Guide
The Bus-Tech PCI ESCON Adapter should be included in the list.
Selecting the Bus-Tech adapter and clicking Properties will bring up the ESCON
Configuration Screen (Figure 4-6).
Figure 4-6. Bus-Tech’s ESCON Configuration Screen
To configure a new device click Add…
Figure 4-7. Add Device Dialog
Complete the Channel Link Address, LPAR, CUAdd, Base Device Address and
Emulation Type fields in the Add ESCON Devices dialog (Figure 4-7) according to
the descriptions of these fields found on pages 16-17 of this chapter. If your
mainframe is configured with ESCON Multiple Image Facility (EMIF) and this
CHPID is defined on the mainframe as shared, then check the CHPID is shared
check box. Enter the number of devices you wish to define. For example, to create