Multi-Tech Systems 40-01459-D0-001 - Manual (Page 45)

TCP/IP Direct Connect 39
TCP/IP Profile
TCP/IP Direct Connect links require the IBM TCP/IP protocol stack running on your
System/390. Your TCP/IP Profile will need to be modified to support the new link.
The following is an example of the entries required to define a connection:
; CTC connection
DEVICE DEVCTC1 CTC a00 IOBUFFERSIZE 65535
LINK LINKCTC1 CTC 0 DEVCTC1
;
HOME
201.168.1.33 LINKCTC1
GATEWAY
;
; Direct Routes - Routes that are directly connected to my interfaces.
;
; Network
First Hop Link Name Packet Size Subnet Mask Subnet Value
201.168.1 = LINKCTC1 4096 0.0.0.224 0.0.0.32
START DEVCTC1
Figure 5-23 shows a properly configured adapter for a mainframe with two logical
partitions (0 and 1) and a server with TCP/IP Direct Connect configured for each
partition.
Device pair (00,01) is used for LPAR 0 and device pair (02,03) is used for LPAR 1.