Ppp > power-on configuration, Ppp > modem commands – Multi-Tech Systems MULTIMODEM MTCBA-C-EN-NX User Manual
Page 34
Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F)
34
PPP > Power-On Configuration
The Power-On Configuration feature allows you to set an initialization string that will be sent to the modem upon boot
up.
Power-On Init String Configuration
Power-On Init String:
You can enter a string of 0 to 40 characters that will be sent to the modem upon
boot up. All commands will initialize before you proceed with regular PPP related
activity.
Note:
When no initialization string is configured, regular functionality of the modem
is retained.
Submit:
Click the SUBMIT button to save this setting.
Note:
You must click Save and Restart once you have completed and submitted
all the screens on which you have made changes.
PPP > Modem Commands
Setting up certain modem commands will allow an external application to query modem information (based on the
commands entered). The application can use
to get the IP address that
is currently assigned to the wireless modem after the PPP connection is established. It also will show the results of up
to ten AT commands entered here.
These commands will be sent every time a PPP connection to the network is initiated.
Example of Useful GPRS AT Commands:
AT+CGSN
Product Serial Number
AT+CGMR
Software Version
AT+CNUM
Wireless Subscriber Number
AT+COPS?
Network Information (Operator)
AT+CREG?
Network Registration
AT+CSQ
Signal Quality
Notes:
•
You can also retrieve the modem information without using a browser:
Make a TCP connection to port 80 (same as the Web Admin port) and send data as:
GET /atinfor.html HTTP/1.1
Then press Enter twice.
•
See the GPRS AT Command Reference Guide (Number S000293x) for other commands.