Dhcp server > fixed addresses, Tools > tools, Tools – Multi-Tech Systems MULTIMODEM MTCBA-C-EN-NX User Manual
Page 44
Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F)
44
DHCP Server > Fixed Addresses
DHCP Fixed Configuration
The DHCP server can be made to assign a fixed IP address for a particular user by identifying the MAC address.
This binding can be made permanent by configuring it here. The same IP address will not be used for any DHCP
client with a different MAC address, even if there is no active DHCP connection with that IP address.
MAC Address:
Enter the MAC address to which the specified IP address binds.
IP Address:
Enter the fixed IP address to be assigned.
Add:
Click the Add button. The addresses are added and will display in the table at the
bottom of the screen from where they can be deleted or changed.
Tools
Tools > Tools
DDNS
DDNS Force Update:
Click the Update button to give the DDNS force update condition.
DDNS Status:
Click the Refresh button to display the DDNS Status after a forced update.
Modem
Reset Modem:
Click the Reset button to reset the wireless modem.